-40%
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??

Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??

$ 99

Availability: 100 in stock
  • Theme: Communication & Utilities
  • All returns accepted: Returns Accepted
  • Original/Reproduction: Original
  • Color: Black
  • Modified Item: No
  • Refund will be given as: Money Back
  • Item must be returned within: 60 Days
  • Condition: Please see the description for details.
  • Restocking Fee: No
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: United States
  • Brand: Unbranded

    Description

    Another item from Country Artifacts, Great Northern Liquidation, Springfield, Vermont.
    Antique Cast Iron Wall Swing Swivel Arm for Telegraph Sounder Resonator Box ??
    After a fair amount of research, I'm landing on the theory that it is a wall arm arm for a telegraph sounder resonator box.  I don't know this for sure, so you will have to be the judge of this, and I would appreciate any help further identifying it.
    The mount on the end of the short riser arm is 2-5/8" x 1-3/4", and it has four small mounting holes in it.  Those small holes are the primary reason why I don't think this is a diner swivel seat - the leverage exerted by a person would rip this arm off the wall.  The small holes indicate a relatively light load on the other end of the arms.  However, that doesn't mean you couldn't enlarge the holes to accept bolts and maybe increase the service load on the other hand, but any decision to do this is undertaken at the discretion of the buyer.
    The short riser arm is 5" from the mounting point to the center of the pivot point, and rises about 6" from the bottom of the mount to the top of the long horizontal arm.  The pivot pin is attached to the long arm and fits down in the short arm (it just pulls out of the socket in the short arm and the pin stays with the long arm).  This arrangement allows for the short arm be reversed so the arm goes down, rather than up.
    The long arm is 14" long from the pivot point on the short arm to the pivot point on the rotating pan on the end of the long arm.  The pan on the end of the long arm is 2-piece, with the lower piece a part of the arm casting and fixed (non-rotational).  That lower part has holes in it for accessing the holes in the rotating pan above, which are larger more robust than the holes in the mount on the short arm.  This confuses my theory about the mount on the other end being a wall mount.  Perhaps the rotating pan is actually
    the
    mounting point, and some object mounts to the other end.  Again, I'm not sure.  The top rotating pan is 5" diameter and the pin connecting it to the bottom part appears to be a rivet, so I don't think that pan will come off willingly.
    Total overall size of this assembly if mounted on a wall with the short arm a riser is about 21-1/2" long x 5" wide x 6-1/2" high.  If the short arm is turned upside down, the height is 5".
    All of the castings are very heavy duty as shown.
    Condition is very good, with a good black patina (light oxidation), and soiling to the casting under the pan as shown.  Actually, the soiling to that part insinuates that the arm was mounted with the pan down and probably the mount as speculated above, perhaps from on top of something up high.  Again, I don't know and would love to hear any theories or actual identifications you may provide.
    Unpacked weight & size:  6.45, 17x5x4.5
    Packed weight & size:  8, 19x7x6
    Package Notes & Ref:  1F109
    :
    Note: Unless specifically indicated otherwise, the shipping charge quoted is to addresses in the
    contiguous 48 United States.
    Please email for a shipping quote to Alaska, Hawaii, US territories, and international destinations.  This particularly applies if the shipping charge is zero ({{detail_product_description}}).
    :
    If for any reason you are unsatisfied with your purchase, I offer a money back guarantee. This can be a full or partial refund (depending on the severity of the problem). In many cases you may not even need to return it. Please contact me through eBay's messaging service with a description of the issue and I will respond as soon as I see it.
    :
    Please also note that my liability for product defects is limited to the purchase price plus shipping. I am not responsible for the installation, training in the use of, or operation of any item I sell. The buyer assumes all responsibility for safely handling, inspecting and verifying the operational quality of their purchases prior to putting them into service. The buyer expressly releases the seller from any liability arising from the installation or operation of the product.
    :
    We appreciate your business. Our Standard Shipping method is our choice of USPS, FedEx or Motor Freight. Unfortunately, because we have very limited space, we cannot store your purchased items for you. For local pickup, we can hold your item for two weeks (or as agreed upon beforehand in writing) from the purchase date, after which we have to charge storage, up to per day, depending on the situation. Once storage fees exceed any moneys paid, we will have to relist the item without refund.